Managing The Machine From A Computer - Canon image RUNNER 3245 Getting Started Manual

Managing the Machine from a Computer

The following operations and settings are required to manage the machine from a computer.
If you are using a NetWare network, NetBIOS network, or AppleTalk network, you cannot use this function.
1
Connect the machine to the network.
1
See "Connecting to a Network, " on p. 4-3.
See "Interface Settings, " on p. 4-9.
2
Set the machine to use the TCP/IP network.
See "TCP/IP Network Setup Procedures, " on p. 5-2.
See "Protocol Settings, " on p. 5-3.
3
Enable the machine to be managed from computers.
To enable the Remote UI
See "System Requirements for Using the Remote UI, " on p. 13-2.
See "Before You Start the Remote UI, " on p. 13-3.
To enable the MEAP management function (SMS)
See "System Requirements for Using SMS, " on p. 13-6.
See "Before Starting SMS (Preparations), " on p. 13-7.
1-12 Operations Required to Use the Machine