Canon image RUNNER 3245 Getting Started Manual page 116

6
6-10 Setting Up a Computer as a File Server
•
If you want to use [Browse] to specify each item, make sure you press [Browse] after the expiration of the
time specified in see "Startup Time Settings, " on p. 5-29.
•
Up to 128 alphanumeric characters can be entered for [Host Name] on the control panel. Also, up to 255
alphanumeric characters can be entered for [Folder Path].
•
If you change the language of the touch panel display, [Host Name] and [Folder Path] may not be displayed
correctly, or you may not be able to browse the directories.
•
In NDS mode, note the following:
- For the host name, specify the context by which a user logs in.
- For the folder path, specify the relative path from the user context. You may omit the "xx=" portion, but
the ".TREE=" portion with the tree name may not be omitted.
- Enter a user name prefixed with "CN=. "
- Unless the same directory tree contains the user account name by which a user logs in and the volume
object to which data is sent, dots are required according to the layer of the relative path. For example, one
dot is required to indicate the layer one level above (Example 2), and two dots are required to indicate the
layer two levels above (Example 4).