Protocol Settings
This section describes how to enter Ethernet driver settings, IP address settings, and e-mail/I-fax
settings.
These settings can be entered by either of the following methods:
The machine's control panel
The Remote UI
NOTE
• The Remote UI enables you to enter a variety of settings for the machine from a computer with a web
browser. For instructions on using the Remote UI, see the Remote UI User's Guide.
• You can also specify IP address settings using NetSpot. For instructions on entering settings using
NetSpot, see Chapter 5, "Network and Printer Settings Using Netspot."
Settings from the Control Panel
IMPORTANT
• Settings entered from the control panel become enabled after the machine is restarted (with the power
switches).
• For details about entering characters using the touch panel display, see the User's Guide.
Setting Up the Ethernet Driver
1
Additional
Press the
key.
Functions
2
Press the [System Settings] key.
IMPORTANT
• If the message "Enter the System Man-
ager ID and Password using the numeric
keys" appears in the touch panel display,
enter the System Manager ID and pass-
word. For instructions on entering the Sys-
tem Manager ID and password, see the
User's Guide.
Protocol Settings
2-5