Screensaver - Panasonic TH-42BT300W Operating Instructions Manual

Screensaver

Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
3D Settings
Signal
Waveform Monitor
Marker settings
RGB/MONO settings
Screensaver
Extended life settings
Input label
Function Button Settings
On/Off Timer Setup
Day/Time Setup
Network Setup
Component/RGB－in select
RGB
External scaler mode Off
Power save Off
1
Function selection
Screensaver
Start
Function Negative image
Mode
2
Mode selection
Screensaver
Start
Function Negative image
Mode
access
2
select
1
Time 15:00
Off
Negative image : Negative image will be displayed on the screen.
Scrolling bar only : A white bar will scroll from left to right. The image won't
Overlay scrolling bar : The brightness of the image will be decreased and a
White screen : The whole screen will be white.
Time 15:00
On
Off
Interval: Operates when Periodic Time and Operating Time are setup and
those times arrive.
Time Designation: Operates when Start Time and Finish Time are setup
Standby after SCR Saver: Operates while Screensaver duration, and
On: Operates when Start is selected and the OK button is pressed.
Screensaver
Start
Function Negative image
Mode
change
2
select
1
be displayed.
white bar will scroll on it.
change
2
select
1
and those times arrive.
display enters standby mode.
Setup menu
Time 15:00
Off
51