Colour Space Adjustment (Colour Gamut) - Panasonic TH-42BT300W Operating Instructions Manual

Colour space adjustment (Colour gamut)

Changes the colour space to BT.709 signal standard chromaticity point and fi ne-tunes it.
Advanced settings
Normalise
Black extension 0
Input level 0
Gamma
W/B High R 0
W/B High G 0
W/B High B 0
W/B Low R 0
W/B Low G 0
W/B Low B 0
Cinema reality
Studio Gain
Noise reduction
Colour gamut
● Colour gamut
DIGITAL CINEMA COLOUR: Sets color gamut to reproduce the original color of movies.
Custom: Enables the colour space adjustment, the colour space adjustment set in the "EDIT" is refl ected.
Native: Disables the colour space adjustment, images are displayed in the original colour gamut of the panel.
BT.709: Changes the colour space to BT.709 signal standard chromaticity point.
EBU: Changes the colour space to EBU signal standard chromaticity point.
SMPTE-C: Changes the colour space to SMPTE-C signal standard chromaticity point.
Notes:
• This setting is memorized separately for each input terminal and "Picture Mode".
• For 3D images, this setting becomes "Native" and no setting is available.
● Edit
Colour space is fi ne-tuned.
Notes:
• This setting is valid when "Colour gamut" is "Custom".
• This setting is memorized separately for each input terminal and "Picture Mode".
1
Select "Edit".
2
Select an adjustment
item.
3
Change the numerical value.
[To adjust with the ▲▼ button]
Press the button.
Change the numerical value
with the ▲▼ button.
Press the button.
4
Press the button.
Adjustment is ended.
2.2
Off
Off
Off
access
2
select
1
select
65535
[To input the numerical value directly]
Input the numerical value from
Pressing the
Press the
Select the item and set.
access
2
Colour gamut
Colour gamut
select
1
Colour gamut
Colour gamut
Edit
R
R Ratio
65535
G Ratio
2110
B Ratio
Reset
will cancel the value change.
button.
Picture Adjustments
EBU
G B
2900 0
65535 0
0 1760 65535
y
to
Chromaticity diagram displays in
gray the dot and line to be adjusted.
change
2
select
1
Custom
x
33