Extended Life Settings - Panasonic TH-42BT300W Operating Instructions Manual

Extended life settings

The following settings are setup to reduce image retention:
3D Settings
Signal
Waveform Monitor
Marker settings
RGB/MONO settings
Network Setup
Screensaver
Extended life settings
Input label
Function Button Settings
On/Off Timer Setup
Day/Time Setup
Network Setup
Component/RGB－in select
RGB
External scaler mode Off
Power save Off
Image Retention Reduction Menu
"Extended life settings" enables you to set the following 5 menus (Image Retention Reduction Menu) as recommended
values or set them individually.
Picture Mode
Contrast
"Picture Mode" and "Contrast" are same as "Picture" menu items (see page 30). The settings of this menu will be
refl ected to the "Picture" menu.
Side panel
Do not display a picture in 4:3 mode for an extended period,
as this can cause an image retention to remain on the side
panels on either side of the display fi eld.
To reduce the risk of such an image retention, illuminate
the side panels.
This function may be applicable to the non-picture area.
Off: Darken both ends.
Low: Make it dark gray.
Mid: Make it gray.
High: Make it light gray.
Notes:
• To reduce the occurrence of image retention, set the Side panel to High.
• The side panel may fl ash (alternate black/white) depending on the picture being shown on the screen. Using Cinema
mode will reduce such fl ashing.
Extended life settings
Express settings
Custom settings
access
2
select
1
Extended life settings
Recommended settings
Picture Mode
Contrast
Side panel
NANODRIFT Saver
Peak limit
Lock settings
Apply to current input
Apply to all inputs
Set to the recommended value
Set individually
Reset Reset to the factory settings
Dynamic
30
High
Image Retention Reduction
Mid
Menu
Off
Unlock
side panel
4:3 Screen
Display
Setup menu
image
retention
53