Video Equipment Connection; Video And Component / Rgb In Connection - Panasonic TH-42BT300W Operating Instructions Manual

Video equipment connection

SLOT: Terminal board (optional
accessories) insert slot
page 4)
Note:
The right side slot is for factory
use only. The terminal board with
1-slot width does not function
when installed in the right side
slot.
LAN: Connect to a network to control the unit.
(see page 65)
AV IN (VIDEO): Composite Video Input Terminal (see below)
COMPONENT/RGB IN: Component/RGB Video Input Terminal
AV IN (HDMI): HDMI Input Terminal (see page 12)
Connect to video equipment such as VCR or DVD player.

VIDEO and COMPONENT / RGB IN connection

Note:
Additional equipment, cables and adapter plugs
shown are not supplied with this set.
RCA-BNC
Adapter plug
(see
(see below)
Notes:
• Change the "Component/RGB-in select" setting in the "Setup"
• Signals input to COMPONENT/RGB IN terminals correspond to
RCA-BNC
Adapter plug
3D IR TRANSMITTER:
Connect the 3D IR
TRANSMITTER
(optional accessory).
L
AUDIO
R
OUT
VIDEO
OUT
menu to "Component" (when Component signal connection) or
"RGB" (when RGB signal connection). (see page 40)
Sync on G or Sync on Y.
Y
P
B
Y , P , P ,
B R
OUT
P
R
L
AUDIO
R
OUT
Connections
SERIAL: Control the
Terminals are on the
bottom side of the
Plasma Display.
DVI-D IN: DVI-D Input Terminal
(see page 12)
PC IN: PC Input Terminal
Connect to video terminal of PC
or equipment with Y, P
P (C ) output (see page 13).
R R
VCR
DVD Player
Computer RGB Camcorder
Plasma Display
by connecting
to PC (see
page 14)
(C ) and
B B
11