Sound Adjustment; Sdi Sound Output - Panasonic TH-42BT300W Operating Instructions Manual

Sound Adjustment

1
Display the menu screen.
2
Select "Sound".
Picture
Setup
Pos. /Size
Sound
3
Select the item and set.
Normalise
Sound Mode Normal
Bass 0
Mid 0
Treble 0
Balance 0
Surround Off
Volume 1
4
Exit the menu.
Item
Sound Mode
Bass
Mid
Treble
Balance
Surround
Volume
Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
Helpful Hint (
Normalise
While the "Sound" menu is displayed, if the OK button is pressed during "Normalise", then all adjustment values
are returned to the factory settings.

SDI Sound Output

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD), Dual Link HD-SDI Terminal Board (TY-FB11DHD), or Dual HD-SDI
Terminal Board for 3D (TY-FB30DHD3D)
SDI Sound Output
Left Channel
Right Channel
Sound Out
Level Meter
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear: Attenuates human voice.
Adjusts low pitch sounds.
Adjusts normal sounds.
Adjusts high pitch sounds.
Adjusts left and right volumes.
Select On or Off.
Adjusts the sound volume level.
Normalisation)
2/2
Channel 1
Channel 2 Right Channel
On
Off
access
2
select
1
adjust
2
select
1
or
Details
Item
Channel 1 to Channel 16
Left Channel
Selects left audio channel.
Channel 1 to Channel 16
Selects right audio channel.
On
On: Enables audio output.
Sound Out
Off: Disables audio output.
Off
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter;
4 channels each on both right and left sides of the display.
Level Meter
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch: Displays the audio level meter (9-16ch)
Details
Off
1-8ch 9-16ch
39