Digital Zoom - Panasonic TH-42BT300W Operating Instructions Manual

Digital Zoom

This displays an enlargement of the designated part of the displayed image.
To use this function, go to "Function Button Settings" in the Setup menu and
set this function to the FUNCTION button (see page 56).
1
Display the operation guide.
During Digital Zoom, only the following buttons can be operated.
[Unit]
INPUT
2
Select the area of the image to be enlarged.
3
Select the magnifi cation required for the enlarged display.
4
Return to normal display (quit Digital Zoom).
Notes:
• When power goes OFF (including "Off Timer" operation), Digital Zoom terminates.
• The Digital Zoom function cannot be selected while in the following operation state:
When Screensaver is running (see page 51).
• While Digital Zoom is in operation, "Adjusting Pos./Size" cannot be used.
22
Press to access Digital Zoom.
The operation guide will be displayed.
+
MENU -/ VOL / ENTER/
VOL button
Press on the enlargement location to select.
The cursor will move.
Each time this is pressed, the magnifi cation factor changes.
This is shown in the image being displayed.
or Press to exit from the Digital Zoom.
1 2
1
Exit
2 2
Exit
3 4