External Scaler Mode - Panasonic TH-42BT300W Operating Instructions Manual

External scaler mode

Off On
This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such
as resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p•25p•30p•50p•60p
Off: Use the built-in scaler.
On: Use an external scaler.
Note:
If "On" is set when other than corresponding signal is input, "Input signal must be 1125p(1080p)"message is
displayed.
Using Remote Control
"External scaler mode" can also be set with the FUNCTION button on the
remote control (see page 63).
External scaler mode On
Note:
Selecting "On" in this setting deactivates the following settings and disables these operations.
Pos. /Size menu: H-Size, V-Size, 1:1 Pixel Mode, (see page 27, 28)
Picture menu: Brightness, Colour, Hue, Sharpness, Memory save, Memory load (see page 30, 36, 37)
Advanced settings: Cinema reality, Noise reduction (see page 32)
Signal menu: XGA Mode (see page 45)
Options menu: Display size, All Aspect (see page 60)
ASPECT Controls (see page 21)
"EXT. SCALER" is displayed in the menu screen to indicate that an external scaler is in use.
Normalise
Picture Mode Normal
Contrast 25
Brightness
Colour
Hue
EXT.SCALER
Setup menu
41