Precautions) - Panasonic TH-42BT300W Operating Instructions Manual

Item
Auto Setup
Advanced Motion
Resolution
Power On Message
(No activity power off)
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from "On" to "Off", the confi rmation screen is displayed as below.
Pressing "YES" switches the setting.
3D Safety Precautions
Sets the operational mode of the automatic position adjustment in the Pos./Size menu.
Manual: Automatic position adjustment starts when
automatic position adjustment is executed from the Pos./Size menu.
Auto: Other than remote control or menu operation, automatic position adjustment starts:
When the display power is turned ON.
When the input signal is switched.
Displays motion picture images at higher resolution.
On Off
Notes:
• Please set to "Off" if images look unnatural.
• This function is disabled during 3D images.
Whether to show/hide No activity power off Precautions at the time of power ON is set.
On: The warning precautions are shown at the time of power ON.
Off: The warning precautions are not shown at the time of power ON.
Note: This setting is enabled only if "No activity power off" is "Enable" (see page 42).
Options Adjustments
Adjustments
is pressed on the remote control or
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
YES NO
61