Marker Settings - Panasonic TH-42BT300W Operating Instructions Manual

Setup menu

Marker settings

Various markers for editing image are displayed.
Notes:
• This function is available when "Studio mode" in Options menu is set to "On"
• This function is disabled during 3D images.
• An aspect of "4:3" or "16:9" is valid for this function. Only an aspect of "16:9" is valid at the input of HD signal.
3D Settings
Signal
Waveform Monitor
Marker settings
RGB/MONO settings
Network Setup
Screensaver
Extended life settings
Input label
Function Button Settings
On/Off Timer Setup
Day/Time Setup
Network Setup
Component/RGB－in select
RGB
External scaler mode Off
Power save Off
Marker display settings
• Marker
Set show/hide of the marker.
Off: The marker is not displayed.
Preset1 / Preset2: The marker is displayed by Preset1 or 2 setting. You can confi gure the display setting of
Preset1/2.
• You can also display the marker with the FUNCTION button on the remote control (see page 63).
• Time out (5 min)
Set the marker display time-out.
On: The marker display disappears in 5 minutes (time out).
Off: The marker display time-out does not occur.
Marker advanced settings
• 16 : 9
Select 16:9 marker display and the marker type.
Off 4:3(1.33)
90% 88%
• This setting is valid only if an aspect of "16:9" is used.
Aspect marker:
4:3, 13:9, 14:9, CNSCO, VISTA
4:3 marker
Safe area marker:
95%, 93%, 90%, 88%, 80%, User
90% Area marker
48
access
2
select
1
13:9(1.44) 14:9(1.55)
80% User
CNSCO marker (2.39:1)
• Selecting User allows the marker area set in 1% increments
in "Marker Size (%)" to be refl ected in the confi guration of
safe area marker.
Select the item and set.
Marker settings
Marker Preset1
Time out (5 min) Off
90%
16:9
Marker Size (%)
Colour
Red
Brightness 3
4:3 80%
Marker Size (%)
Colour Green
Brightness 3
Centre
Off
Colour Blue
Brightness 3
Cross Hatch Off
Colour
Brightness
CNSCO(2.39)
VISTA marker (1.85:1)
change
2
select
1
VISTA(1.85) 95% 93%