Marker Settings - Panasonic TH-65VX300U Operating Instructions Manual

MARKER SETTINGS

Various markers for editing image are displayed.
Notes:
• This function is available when "Studio mode" in OPTIONS menu is set to "On"
• This function is disabled during 3D images.
• An aspect of "4:3" or "FULL" is valid for this function. Only an aspect of "FULL" is valid at the input of HD signal.
3D SETTINGS
SIGNAL
WAVEFORM MONITOR
MARKER SETTINGS
RGB/MONO SETTINGS
SCREENSAVER
EXTENDED LIFE SETTINGS
INPUT LABEL
FUNCTION BUTTON SETTINGS
ON/OFF TIMER SETUP
DAY/TIME SETUP
NETWORK SETUP
COMPONENT/RGB-IN SELECT
RGB
EXTERNAL SCALER MODE OFF
POWER SAVE OFF
Marker display settings
• MARKER
Set show/hide of the marker.
OFF: The marker is not displayed.
PRESET1 / PRESET2: The marker is displayed by PRESET1 or 2 setting. You can con¿ gure the display setting of
PRESET1/2.
• You can also display the marker with the FUNCTION button on the remote control (see page 63).
• TIME OUT (5 MIN)
Set the marker display time-out.
ON: The marker display disappears in 5 minutes (time out).
OFF: The marker display time-out does not occur.
Marker advanced settings
• 16 : 9
Select 16:9 marker display and the marker type.
OFF 4:3(1.33)
90% 88%
• This setting is valid only if an aspect of "FULL" is used.
Aspect marker:
4:3, 13:9, 14:9, CNSCO, VISTA
4:3 marker
Safe area marker:
95%, 93%, 90%, 88%, 80%, USER
90% Area marker
2 access
select
1
13:9(1.44) 14:9(1.55)
80% USER
CNSCO marker (2.39:1)
• Selecting USER allows the marker area set in 1% increments
in "MARKER SIZE (%)" to be reÀ ected in the con¿ guration of
safe area marker.
Select the item and set.
MARKER SETTINGS
MARKER PRESET 1
TIME OUT (5 MIN) OFF
16:9 90%
MARKER SIZE(%)
COLOR
RED
BRIGHTNESS 3
4:3 80%
MARKER SIZE(%)
COLOR GREEN
BRIGHTNESS 3
CENTER
ON
COLOR
BLUE
BRIGHTNESS 3
CROSS HATCH
OFF
COLOR
BRIGHTNESS
CNSCO(2.39)
VISTA marker (1.85:1)
SETUP menu
change
2
1 select
VISTA(1.85) 95% 93%
49