Settings Menu Content - Panasonic TH-98SQE1W Operating Instructions Manual

Settings Menu Content

Menu that cannot be adjusted is greyed out or hidden.
Adjustable menu changes depending on signal, input and menu setting
Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Tint
Energy Saving
Backlight
Advanced Settings
Dynamic
Contrast
Noise Reduction
Colour Temp
Aspect
Picture Shift
Film Mode
Skin Tone
RGB Gain
HDMI Full Range
English - 24 -
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Text, Game, Sports, Signage and Natural.
Note: Not apply for PC input.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
Adjust hue of skin colour.
Reddish <--> Greenish
Note: Not apply for PC input
This Display is designed to be environmentally friendly. If you set this option to Minimum,
Medium, Maximum or Auto the Display will reduce energy consumption by regulating
the backlight level accordingly. If you like to set the backlight level to a fixed value set as
Custom and adjust the Backlight (located under this setting) manually using Left or Right
buttons on the remote. Set as Off to turn this setting off.
If pressed Right button while Auto option is selected or Left button while Custom option
is selected, "Screen will be off in 15 seconds." message will be displayed on the screen.
Select Proceed and press ENTER to turn the screen off immediately. If you don't press
any button, the screen will be off in 15 seconds. Press any button on the remote or on the
Display to turn the screen on again.
When the Display is not in use, please switch off or disconnect the Display from the mains
plug. This will also reduce energy consumption.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other than Custom.
You can change the dynamic contrast ratio to desired value.
Off Low Medium High.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Off Low Medium High.
Sets the desired colour temperature value. 10700K, 9300K, 6500K options are available.
Sets the desired image size format.
Full, 16:9, 14:9, 4:3, Cinema, Auto for except PC , 16:9,4:3 for PC
This option may be available depending on the Aspect setting. Highlight and press
ENTER, then use directional buttons to shift the picture upwards or downwards.
Operate only Cinema
Press the ENTER key and move the screen up and down with the up and down keys
Films are recorded at a different number of frames per second. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the strength of the red, green and blue colours. You can use this feature for fine
adjustment of white balance in the picture.
While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.