Radio Operation; Alarm Mode - Grundig Sonoclock 51 SC 5301 User Manual

OPERATION _______________________
Switching on and off
Press »RADIO ON« to switch on the device.
1
Press »RADIO/ALARM
2

Radio operation

For the best FM (VHF) reception, it is sufficient to direct the wire antenna
accordingly.
Tuning radio stations
Select the required bandwidth with
1
right side of the device).
Find and tune the station using the control dial (right side of device).
2
Adjusting the volume
Adjust the volume using »
1
device).
Adjusting the brightness of the display
1 Increase the brightness of the display with
2 Decrease the brightness of the display with

Alarm mode

Selecting the alarm times
Push the »ALARM 1 1+2
1
device) to »1« or »2«.
– Display: the »ALARM 1
or
activate both alarm times by placing the
switch (on the left side of the device) in the »1+2« position.
– Display: the »ALARM 1
OFF« to switch off the device.
»BAND FM•MW•LW« (on the
|
VOLUME « (on the right side of the
»DIMMER
»DIMMER
2« sliding switch (on the left side of the
•
« or »ALARM 2
»ALARM 1 1+2
•
« and »ALARM 2
«.
«.
•
« LED glows
2« sliding
•
« LEDs glow.
17