Radio Operation - Grundig Sonoclock 590 User Manual

OPERATION
Switching­on­and­off
1
Press »RADIO­ON« to switch on
the device.
2 Press » ­« to switch off (stand-by)
the device.
Radio­operation
For the best FM (VHF) reception, it is
sufficient to direct the wire antenna
accordingly.
Tuning­radio­stations
1
Set the frequency band with
»FM­­­MW«.
2
Find and tune the station using
»-­TUNING­+«.
Adjusting­the­volume
1
Adjust the volume using
»+­VOLUME­-«.
Automatic­dimmer
Your device is equipped with an au-
tomatically adjusts for the brightness
of the display.
Alarm­mode
Selecting­the­alarm­times
The alarm stand-by (» « or » « )
must be activated.
1 »AL­ 1­ 1+2­
Push the
switch to »1« or »2«.
­_____________________________________
2« sliding
– Display: the »AL­1« or »AL­2«
LED glows;
or
activate both alarm times by plac-
ing the »AL­1­1+2­2« sliding in
the »1+2« position.
– Display: the »AL­1« and »AL­2«
LEDs glow.
Displaying­the­alarm­times
Depending on the setting (»AL­1« or
»AL­2«) either alarm time 1 or alarm
time 2 is displayed.
1 Press »ALARM« and hold it
down.
– Display: the last alarm time set.
2
Release »ALARM« to end the dis-
play of the alarm time.
– Display: the current time.
Note:
»AL­ 1­ 1+2­
If the
7
switch is set to »1+2«, the alarm
times cannot be displayed.
2« sliding
ENGLISH ­ 1 9