Alarm Mode; Radio Operation - Grundig Sonoclock 53 SC 5303 DCF User Manual

18
OPERATION
Switching on and off
•
Use »RADIO
1
off.

Radio operation

For the best FM (VHF) reception, it is sufficient to direct the wire antenna
accordingly.
Tuning radio stations
Select the desired frequency band with
1
of the device.
Tune to the station using »TUNING« (on the right side of the device).
2
Adjusting the volume
Adjust the volume using »
1
the device).

Alarm mode

Displaying the alarm time
Press »ALARM« and hold it down.
1
– Display: the last alarm time set.
2 Release »ALARM«.
– Display: the current time.
Alarm with radio station
•
Press »RADIO
1
2 Find and tune the station using the control dial (on the right side of the
device).
3 Set the alarm volume using »
Select the radio alarm (»
4
(on the left side of the device).
– The radio switches on at the set alarm time (alarm duration 59 minutes).
Alarm with signal tone
1 Select the signal tone (»e«) using
(on the left side of the device).
– The signal tone switches on at the set alarm time (alarm duration 59
minutes).
__________________________________________
9
e
ALARM« to switch the device on and
»FM . .
|
VOLUME
9
e
ALARM« to switch on the device.
|
VOLUME
«) using »RADIO
»RADIO
MW« on the right side
« (on the right side of
«.
•
9
e
ALARM«
•
9
e
ALARM«