Grundig Sonoclock 51 SC 5301 User Manual page 10

18
OPERATION ___________________________________
Displaying the alarm times
Note:
Depending on the setting –
alarm time 1 or alarm time 2 is displayed.
1 Press »ALARM« and hold it down.
– Display: the last alarm time set.
Release »ALARM« to end the display of the alarm time.
2
– Display: the current time.
Note:
If the »ALARM 1 1+2
vice) is set to »1+2«, the alarm times cannot be displayed.
Alarm with signal tone
Set the signal alarm (»e«) with
1
of the device).
– The device switches on at the set alarm times with the alarm signal
(alarm duration 59 minutes).
Alarm with radio station
Press »RADIO ON« to switch on the device.
1
2 Find and tune the station using the control dial (right side of device).
Set the required alarm volume with »
3
Select the radio alarm (»
4
the device).
– The device switches the radio on at the set times
(alarm duration 59 minutes).
Interrupting the alarm
Press »SNOOZE« while the alarm is sounding.
1
– The alarm (signal or radio) stops.
– The alarm comes again at 7-minute intervals
(alarm duration - 59 minutes).
Cancelling the alarm for the day
During the alarm press
1
– The alarm (signal or radio) stops, the alarm stand-by retains the set
time for the next day.
»ALARM 1« or
2« sliding switch (on the left side of the de-
»ALARM 9 e
|
VOLUME
»ALARM 9 e
«) with
»RADIO/ALARM
OFF«.
»ALARM 2« – either
« (on the left side
«.
« (left side of