Radio Operation - Grundig Sonoclock 390 Manual

OPERATION
Switching on and off
1
Use »
vice on and to standby.
Radio turns on
Standby, radio/signal tone
turn off
Wake by radio
Wake by signal tone

Radio operation

For the best FM (VHF) reception, it is
sufficient to direct the wire antenna
accordingly.
Tuning radio stations
1
Set the frequency band with
»FM••MW« (SC 390);
or
set the frequency band with
»FM••LW« (SC 390 QL);
2
Find and tune the station using
»TUNING«.
Adjusting the volume
1
Adjust the volume using »
Alarm mode
Displaying the alarm time
1 Press and hold down »ALARM«.
– Display: the last alarm time set.
2
Release »ALARM«.
– Display: the current time.
_____________________________________
« to switch the de-
C
Alarm with radio station
1
Use »
device.
2
Set the frequency band with
»FM• •
»FM••LW« (SC 390 QL).
3
Find and tune the station using the
»TUNING«.
4 Set the alarm volume using »C«.
Note
If the alarm volume is set to
7
minimum, the sound cannot be
heard at the alarm time.
5
Select the radio alarm (» « ) with
»
– The radio switches on at the set
alarm time (alarm duration
1 hour, 59 minutes).
Alarm with signal tone
1 Select the signal tone alarm (» « )
with »
– The signal tone switches on at
« .
the set alarm time (alarm dura-
tion 1 hour, 59 minutes).
« to switch on the
MW« (SC 390) or with
« .
« .
ENGLISH 19