Oven Heating Elements - GE JCP67 Use And Care & Installation Manual

Oven Light
spring wire to protect the oven bdb from the heat of
-
the
disconnect the electrical power for the range at the
main fuse or circuit breaker panel or pull the plug.
Be sure to let the light cover and btib cool ~mpletely
before removing or replacing.
Broiler Pan and Mck
remove the broiler pan from the oven.
After broiling,
Remove the rack from the pan. Carefully pour out
grease from the pan into a proper container. Wash and
rinse the broiler pan and rack in hot water with a
If food has burned on, sprirdde the rack with
detergent whfie hot and cover with wet paper towels
or a dishcloth. Soaking the pan wdl remove burned
on foods.
The broiler pan may be cleaned with a commercial
oven cleaner. Do not use an oven cleaner on the rack.
Oven Shelves
Clean the shelves with an abrasive cleanser or
After cleaning, rinse the shelves with
steel wool.
clean water and dry with a clean cloth.
Wipe the shelf supports with rooking oti after self-
cleaning to make shelves slide more easdy.

Oven Heating Elements

Do not clean the bake element or the broti element
soil will bum off when the elements are heated.
The bake element can be lifted gently to clean the
oven floor. H sptilovers, residue or ash accumulate
around the bake
element gently wipe around the
element with warm water.
(continued)
To
remove the tight bdb:
Swing the wire to the side and hold.
1.
2. Lift off the @ass lens.
3. Remove the bulb.
To replace the light bulb:
1. Insert a new ~ watt appliance bulb.
2. Replace the lens over the socket.
3. Swing the wire over the glass lens.
4. Reconnect the electnd power to the range.
the oven is in use.
Both the brofler pan and rack can also be cleaned in
the dishwasher.
Do not store a soiled broder pan and rack anywhere
Do
not clean the broiler pan or rack in the
Broil Element
Bake Element