GE JCP67 Use And Care & Installation Manual page 14

Your oven temperature is controlled very accurately
using an oven control system. We recommend that
you operate the range for a number of weeks using the
time given on recipes as a guide to become familiar
with your new oven's performance.
How to Set the Mnge for Preheattig
Preheating is genertily done before baking. The oven
should be preheated to the temperature you want
To avoid possible
correct position before you turn the oven on.
How to Set the Mnge for BaMg
To avoid possible b-s, place the shelvm in
the correct position before you turn the oven on.
1. Turn the O- SET knob to B= and
the OWN TEMP knob to the temperature
in the recipe.
2. Check food for doneness at minimum time
in the recipe. Cook longer if necessary.
3. Turn the OWN SET and the OWN TEMP knobs
to 0~ and then remove the food from the oven.
How to ~me Bake
The automatic oven timer controls are designed
to turn the oven on or off automatidly at specific
times that you set. fiamples of Immediate Start and
Automatic Stop (the oven turns on now and you set
it to turn off autornatidly) or Delay Start and
Automatic Stop (setting the oven to turn on
Stop Time) till be described
On model JCP67, the STOP and ST~T dids are
different in a~warance ti the dids on the J~57.
However, th~~ do operate in the same manner.
shows the correct time of day.
14
surfaces of the range get hot too.
1. Turn the OWN SET knob to B=.
2. Turn the OWN ~MP knob to the desired
temperature setting.
3. When the oven has preheate~ the Oven Cycling
Light wfll go out. ~s indi~tes the oven has
reached the set temperature.)
o
Model JCP67