Specifications; Before Assembly - Schwinn 450 Elliptical Assembly Manual

26.1"
(66.3 cm)

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the
location must be on a hard, level surface. Allow a workout area of a minimum 74.1" x 118.4" (188.2
cm x 300.7 cm). Be sure that the workout space you are utilizing has adequate height clearance,
taking into consideration the height of the user and the maximum incline of the elliptical machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important Safety Instructions" before assembly.
• Collect all the pieces necessary for each assembly step.
• Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
• When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
Maximum User Weight:
Maximum Inclined Pedal Height:
68.3"
(173.6 cm)
Power Requirements:
Regulatory Approvals:
70.4"
(178.9 cm)

SpECIfICATIONS

Operational Voltage: Operational Voltage 9VDC
Operating Current:
AC Power Adapter:
300 lbs. (136 kg)
19 inches
1500 mA
UL listed, CSA certified (or
equivalent), Rated 120V 60Hz
Input, 9VDC, 1500mA Out-
put. Class 2 or LPS.
5