Pausing Or Stopping; User Statistics - Schwinn 450 Elliptical Assembly Manual

Pausing or Stopping

The Console will go into Pause Mode if the user stops pedaling and pushes STOP during a
workout, or there is no RPM signal for 5 seconds (user not pedaling). The Console display shows
WORKOUT PAUSED, and after 4 seconds the current workout data starts to scroll automatically
(the same format as Results Mode). You can use the Increase/Decrease buttons to move through
the results manually.
1. Stop pedaling and push the STOP button to pause your workout.
2. To continue your workout, push START/ENTER or start pedaling.
To stop the workout, push the STOP button. The Console will go into Results / Cool Down
mode.

User Statistics

Each User Profile stores the statistics from all workout data recorded for that user in three capaci-
ties - Last Workout, Averages, and Totals.
When the TOTALS displayed for a statistic exceeds the maximum value, the count will start again
at zero.
• Total number of workouts—maximum is 9999.
• Total hours—maximum is 999:59 (999 hours, 59 minutes).
• Average speed—mph or km (per units in setup)
• Total distance—maximum is 9999.9.
• Total calories—maximum is 999999.
The Statistics option in the User profile menu lets you look at the recorded data or delete it.
1. Push the Schwinn Advantage
shows the User Profiles.
2. Use the Increase() and Decrease() buttons to select a User profile, and push START/EN-
TER to make your selection.
3. A fter you select the User profile option, you have two options: VIEW STATS and WORKOUT.
Use the Increase() and Decrease() buttons to go to the Statistics option, and push START/
ENTER to make your selection.
4. T he Console display shows the User Statistics menu options—LAST WORKOUT, AVERAGES,
TOTALS and RESET STATS. Use the Increase/Decrease buttons to move between the menu
options, and push START/ENTER to make your selection.
5. Use the Increase/Decrease buttons to move between the values, or after a few seconds the
workout statistics start to scroll automatically. You can use the Increase/Decrease buttons to
move through the results manually. Push STOP to exit to the User Statistics menu.
button at the Power-Up Mode screen. The Console display
™
41