Specifications; Before Assembly - Schwinn 420 Elliptical 2012 model Assembly Manual

determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Maximum User Weight:
Power Requirements:
Operational Voltage: Operational Voltage 9VDC
Operating Current:
Regulatory Approvals:
AC Power Adapter: UL listed, CSA certified (or

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the
location must be on a hard, level surface. Allow a workout area of a minimum 74" x 130" (1.9 m x
3.3m).
Basic Assembly Tips
Follow these basic points when you assemble your machine:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten,
and the left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt
through the holes.
5. The assembly requires 2 people.
Note: Some axles contain oil. Use caution to avoid staining clothes or carpet.
300 lbs. (136 kg)
1500 mA
equivalent), Rated 120V 60Hz
Input, 9VDC, 1500mA Output.
Class 2 or LPS.

SpECIFICATIONS

62" (157.5 cm)
71"
(180.3 cm)
26" (66 cm)
5