Specifications; Before Assembly - Schwinn 430i Elliptical Assembly Manual

71.5 cm
( 28.2" )
This product conforms to the applicable EN ISO 20957 International Standards for Stationary Training Equipment, Class H.
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 193.4 cm x 300 cm ( 76.2" x 118.1" ). Be sure that the workout
space you are utilizing has adequate height clearance, taking into consideration the height of the user and the maximum
incline of the elliptical machine.
Basic Assembly Tips
Follow these basic points when you
assemble your machine:
• Read and understand the "Important
Safety Instructions" before assem-
bly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly
lift and look through the bolt holes
to help insert the bolt through the
holes.
• The assembly can require 2 people.
Maximum User Weight:
Machine Weight:
160.5 cm
Total Surface Area (foot print) of equipment:
( 63.2" )
Power Requirements:
Operational Voltage: 220V - 240V AC, 50Hz
Operating Current:
178.1 cm
Regulatory Approvals:
( 70.1" )
0.6m
( 24" )
1.93m
( 76.2" )

SpecIfIcatIonS

136 kg ( 300 lbs. )
74.5 kg ( 164.2 lbs. )
12734.2 cm
0.4A
3.0m ( 118.1" )
0.6m
( 24" )
( 1976.8 inches )
2 2
0.6m
( 24" )
0.6m
( 24" )
5