User Setup Mode - Schwinn 450 Elliptical Assembly Manual

4. Use the Increase() and Decrease() buttons to adjust the workout time. Push START/EN-
TER.
Note: The range of values for TIME is 5 - 99 minutes; the default value is 30:00.
5. Use the Increase() and Decrease() buttons to adjust the resistance level.
Note: The range of values for LEVEL is 1 - 16; the default resistance level is 3.
6. Push the START/ENTER button to start the profile workout. The time will count down from
the set time.
Schwinn Advantage
The Schwinn 50 Series console lets you store and use 2 User profiles. The User profiles auto-
®
matically record the workout results for each User profile, and lets you view your workout data.
The User profile stores the following data:
• Name—up to 19 characters
• Age
• Weight
• Gender
• a Custom Workout (program profile)
• Total time (last workout, average, and total)
• Average speed (last workout, average, and total)
• Total distance (last workout, average, and total)
• Total calories (last workout, average, and total)
• Total workouts
Note: Push the STOP button to go back to the previous screen.
Add User Profile
1. From the Power-Up Mode screen, push the Schwinn Advantage
onds to go to User Setup Mode.
Note: If no User Profile is set up, the Console will show the Name prompt for User 1. If a User
Profile does exist, use the Increase/ Decrease buttons to select Create User 2 and
push START/ENTER.
2. The Console display shows the "ENTER NAME" prompt. Push START/ENTER.
3 Enter a name for the user. Use the Increase/Decrease buttons to move through the alphabet
and blank space (found between A and Z). To set each letter, push the START/ENTER button.
Push the STOP button to go back to the previous letter.
34

User Setup Mode

™
button and hold for 3 sec-
™