Selecting Audio Output; Pausing Playback; Selecting The Play Mode - Pioneer DVH-P4150UB Operation Manual

Section
Operating this unit
02
1 Use MULTI-CONTROL to select SCAN in
the function menu.
Refer to Introduction to advanced operations
on page 24.
2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3 When you find the desired track press
MULTI-CONTROL to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by using
MULTI-CONTROL.
# After scanning of a disc (folder) is finished,
normal playback of the tracks begins.

Selecting audio output

When playing DVD video discs recorded with
LPCM audio, you can switch the audio output.
When playing Video CD discs, you can switch
between stereo and monaural audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
! If you select Linear PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 42.)
1 Use MULTI-CONTROL to select
LR SELECT in the function menu.
Refer to Introduction to advanced operations
on page 24.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! L+R – left and right
! L – left
! R – right
! MIX – mixing left and right
26
En
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.

Pausing playback

% Press 2/PAUSE to turn pause on.
Playback of the current track pauses.
# To turn pause off, press 2/PAUSE again.
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.

Selecting the play mode

You have two methods for playing DVD-VR
disc; ORIGINAL (original) and PLAYLIST (play-
list).
! Titles created with DVD recorders are
called original. Based on original, rear-
ranged titles are called playlist. Playlists
are created on DVD-R/RW discs.
! This function is available for DVD-VR.
1 Use MULTI-CONTROL to select PLAYLIST
in the function menu.
Refer to Introduction to advanced operations
on page 24.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select the de-
sired play mode.
If the play mode is changed, playback starts
from the beginning of the selected play mode.
CRB2932-A/N
< >26