Playing Tracks In A Random Order; Scanning Tracks Of A Cd; Pausing Cd Playback; Selecting The Search Method - Pioneer DEH-P8600MP Operation Manual

Section
06 Built-in CD Player
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Use MULTI-CONTROL to select
RANDOM.
The function name tag RANDOM is high-
lighted.
2 Press MULTI-CONTROL to turn random
play on.
Random mode :ON appears in the display.
Tracks will play in a random order.
# To turn random play off, press
MULTI-CONTROL again.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Use MULTI-CONTROL to select SCAN.
The function name tag SCAN is highlighted.
2 Press MULTI-CONTROL to turn scan play
on.
Scan mode :ON appears in the display. The
first 10 seconds of each track is played.
3 When you find the desired track press
MULTI-CONTROL to turn scan play off.
Scan mode :OFF appears in the display. The
track will continue to play.
# If the display has automatically returned to
the playback display, select SCAN again by using
MULTI-CONTROL.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
26
En
All manuals and user guides at all-guides.com

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Use MULTI-CONTROL to select PAUSE.
The function name tag PAUSE is highlighted.
2 Press MULTI-CONTROL to turn pause
on.
Pause :ON appears in the display. Play of the
current track pauses.
# To turn pause off, press MULTI-CONTROL
again.

Selecting the search method

You can switch the search method between
fast forward/reverse and searching every 10
tracks.
1 Use MULTI-CONTROL to select
SEARCH MODE.
The function name tag SEARCH MODE is
highlighted.
2 Press MULTI-CONTROL to select the
search method.
Press MULTI-CONTROL until the desired
search method appears in the display.
! FF/REV  Fast forward and reverse
! ROUGH  Searching every 10 tracks
Searching every 10 tracks in
the current disc
If a disc contains over 10 tracks, you can
search every 10 tracks. When a disc contains
a lot of tracks, you can roughly search for the
track you want to play.
1 Select the search method ROUGH.
Refer to Selecting the search method on this
page.