CONTROLS
Adjusting the shift speed RPM 1
5.32
Adjusting the shift speed RPM 2
5.33
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
–
Press the MODE button for 5 - 10 seconds.
The display RPM 1 appears.
Info
The engine speed can be set at intervals of 50.
RPM 1 is the engine speed above which the shift warning light starts to flash.
–
Set the speed with the MODE and SET buttons.
401307-01
Info
The MODE button increases the value.
The SET button decreases the value.
–
Do not activate the two buttons for approx. 15 seconds.
The display RPM 1 goes out and the set speed is stored.
Info
Upon delivery, the speed of RPM 1 is set to 10000.
Condition
The ignition is on.
The motorcycle is stationary.
43