Setting The Time; Adjusting The Shift Speed Rpm 1 - KTM RC 125 Owner's Manual

7 COMBINATION INSTRUMENT
7.21

Setting the time

7.22

Adjusting the shift speed RPM 1

Condition
The ignition is on.
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until ODO appears on the display.
–
Press the MODE and SET buttons for 5 - 10 seconds.
The time display begins to flash.
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.
–
Press the MODE and SET buttons for 5 - 10 seconds.
The time is set.
401303-01
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
–
Press the MODE button for 5 - 10 seconds.
The display RPM 1 appears.
Info
The engine speed can be set at intervals of 50.
RPM 1 is the engine speed above which the shift warning light starts flashing.
–
Set the speed with the MODE and SET buttons.
401307-01
54