Service Schedule - KTM 200 DUKE EU Owner's Manual

SERVICE SCHEDULE

Service schedule
8.1
Check the functioning of the electrical equipment.
Read out the fault memory using the KTM diagnostics tool.
Change the engine oil and oil filter, clean the oil screen.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. ( p. 84)
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the shock absorber and fork for leaks. Perform a fork and shock absorber service if needed and
depending on vehicle use.
Check the swingarm bearing.
Check the wheel bearing for play.
Check the tire condition. (
Check the tire air pressure. (
Check the chain, rear sprocket, and engine sprocket. (
Check the chain tension. (
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation.
Clean the dust boots of the fork legs.
Check the brake fluid level of the front brake. (
Check the steering head bearing play.
Change the spark plugs. x
Check the valve clearance. x
x
p. 87)
p. 92)
p. 87)
x
x
p. 99)
p. 100)
p. 78)
p. 75)
p. 84)
x
( p. 130)
K10N K50A
• •
• •
• •
• •
• •
• •
• •
• •
• •
•
•
• •
• •
•
• •
• •
x
•
• •
• •
•
•
64
K100A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•