Adjusting The Shift Speed Rpm 1 - KTM 2015 RC 390 EU Owner's Manual

7 COMBINATION INSTRUMENT
7.22

Adjusting the shift speed RPM 1

–
Press the MODE button briefly and repeatedly until ODO appears on the display.
–
Press the MODE and SET buttons for 5 - 10 seconds.
The time display begins to flash.
–
Set the hours display using the MODE button.
–
Set the minutes display using the SET button.
–
Press the MODE and SET buttons for 5 - 10 seconds.
The time is set.
401303-01
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
–
Press the MODE button for 5 - 10 seconds.
The display RPM 1 appears.
Info
The engine speed can be set at intervals of 50.
RPM 1 is the engine speed above which the shift warning light starts to flash.
–
Set the speed with the MODE and SET buttons.
401307-01
Info
The MODE button increases the value.
The SET button decreases the value.
–
Do not activate the two buttons for approx. 15 seconds.
54