Checking The Headlight Setting - KTM 200 DUKE EU Owner's Manual

ELECTRICAL SYSTEM

Checking the headlight setting

13.7
A 0 0 A
–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B 0 0 B Distance
B
–
Position the vehicle vertically at a distance
beam.
Guideline
400726-10
Distance
A
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
under the first mark.
B
5 cm (2 in)
in front of the wall and switch on the low
A
5 m (16 ft)
p. 116)
115