KTM 200 DUKE EU Owner's Manual page 133

SERVICE WORK ON THE ENGINE
Info
Drain the engine oil only when the engine is warm.
Preliminary work
–
Remove the front spoiler. (
–
Stand the motorcycle on its side stand on a horizontal surface.
Main work
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Remove oil screen
–
Completely drain the engine oil.
–
Clean the oil drain plug and oil screen thoroughly.
–
Position oil screen
Guideline
B00774-10
Oil drain plug
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
B00775-10
p. 82)
with the O-ring.
1
with the O-ring.
2
and mount and tighten oil drain plug
2
. Remove the oil filter cover
3
out of the oil filter housing.
5
with the O-ring.
1
M24 20 Nm
(14.8 lbf ft)
with the O-ring.
4
131