Brakes; Checking The Brake Discs; Checking The Brake Fluid Level Of The Front Brake - KTM 200 DUKE EU Owner's Manual

BRAKES

Checking the brake discs

11.1
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)

Checking the brake fluid level of the front brake

11.2
Warning
Danger of accidents Failure of the brake system.
–
If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Check
the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
–
Check the thickness of the front and rear brake discs at several places on the disk to
see if it conforms to measurement
Info
Wear reduces the thickness of the brake disc in area
Brake discs - wear limit
Front
Rear
400480-10
» If the brake disc thickness is less than the specified value:
–
Change the brake discs.
–
Check the front and rear brake discs for damage, cracking, and deformation.
» If the brake disc shows signs of damage, cracking, or deformation:
–
Change the brake discs.
.
A
1
3.6 mm (0.142 in)
3.6 mm (0.142 in)
x
x
84
of the brake disc.