Adjusting Seat Depth - Van Seat Only - Invacare Pronto M94 Owner's Manual

DETAIL "A" -
SEAT ASSEMBLY
Seat Frame
Washer
Mounting Screws
* DO NOT Use
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes
for Standard Seat Position
* DO NOT Use
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes
for Standard Seat Position
*NOTE: Only the 22‐inch wide seats have these mounting holes.
DO NOT use these mounting holes.
FIGURE 7.6 Adjusting Seat Position on Seat Frame

Adjusting Seat Depth - Van Seat Only

NOTE: For this procedure, refer to FIGURE 7.7 on page 54.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 50.
2. Remove the seat base from the seat assembly. Refer to Adjusting Seat Position on Seat
Frame on page 52.
3. Remove the six mounting screws located under the seat that secure the seat back
assembly in place.
Part No 1122145
DETAIL "B" - SEAT POSITIONS
Bottom View of Seat Assembly
Front of Seat
DO NOT Use
these mounting
holes.
Rear of Seat
53
SECTION 7—SEAT
Seat Assembly
Seat
Positioning
Strap
* DO NOT Use
Use these Mounting Holes
for 1-inch-back Seat Position
Use these Mounting Holes
for Standard Seat Position
* DO NOT Use
Use these Mounting Holes for
1-inch-back Seat Position
Use these Mounting Holes
for Standard Seat Position
Pronto® M94™