Independent Charger - Invacare Pronto M94 Owner's Manual

SECTION 11—BATTERIES

Independent Charger

NOTE: The charger port located on the Front of the joystick requires the use of an independent
charger. The independent charger is not supplied with the wheelchair.
NOTE: For this procedure, refer to FIGURE 11.7.
WARNING
READ and CAREFULLY follow the individual instructions for each charger (supplied
or purchased). If charging instructions are not supplied, consult a qualified
technician for proper procedures.
CAUTION
DO NOT use an independent charger with an output rating of over 8A (amps). Oth-
erwise, damage may occur.
Required Items: Battery Charger*, Power Cord**
*NOTE: Item not supplied.
**NOTE: AC power cord (3‐prong plug, 15 ampere current rating; industrial type).
1. Attach the battery charger connector to the charger port on the front of the joystick.
2. Plug the charger's AC power cord or extension into the grounded 110‐volt wall outlet.
3. Unplug the AC power cord or extension once charging is complete.
MPJ+ Joystick
SPJ+ Joysticks
Charger/
Programming
Port
Charger/Programming Port
(On Front of Joystick)
FIGURE 11.7 Independent Charger
78
Pronto® M94™ Part No 1122145