Adjusting/Replacing Telescoping Front Rigging Supports - Asba - Invacare Pronto M94 Owner's Manual

STANDARD POSITION
18 & 20-Inch 22 & 24-Inch
Wide
Holes 2 and 3 Holes 4 and 5
FIGURE 9.6 Adjusting/Replacing Telescoping Front Rigging Supports - Van Style Seats
Adjusting/Replacing Telescoping Front Rigging
Supports - ASBA
NOTE: For this procedure, refer to FIGURE 9.7.
1. Remove the two mounting screws, spacers and locknuts that secure the telescoping
front rigging support to the seat frame.
2. Perform one of the following:
A. Slide existing telescoping front rigging support to one of three depth positions.
B. Remove existing telescoping front rigging.
3. Secure telescoping front rigging at desired depth with existing two mounting screws,
spacers, and locknuts. Securely tighten.
NOTE: The two telescoping front rigging supports can be positioned at different depths depending
on the need of the user.
Part No 1122145
Inner Mounting
Holes
Seat Frame
1-INCH OUT
18 & 20-Inch
Wide Wide
Holes 3 and 4
SECTION 9—FRONT RIGGINGS
Not Used
Spacer
8
Locknuts
22 & 24-Inch 18 & 20-Inch
Wide
Holes 5 and 6 Holes 4 and 5
63
Mounting Bolts
Telescoping Front
Rigging Support
Mounting
Holes
7
5
6
4 3
2
Hinge
Not Used
Pins
2-INCHES OUT
22 & 24-Inch
Wide Wide
Holes 6 and 7
Pronto® M94™