Invacare Veranda User Manual page 24

5 SAFETY INSPECTION/TROUBLESHOOTING
❑
Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Inspect handrims for signs of rough edges or peeling.
❑
Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
❑
Inspect casters for cracks and wear (hub and rim).
❑
Inspect front casters for cracked, bent or broken spokes.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure the casters are free of debris.
Inspect/Adjust Weekly
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect tires for flat spots and wear.
❑
Inspect rear wheels for cracked, bent or broken spokes.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.
❑ Ensure the casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
Invacare® Veranda™Wheelchair
24
Part No. 1148116