Front Rigging; Installing/Removing Front Riggings - Invacare Veranda User Manual

6 Front Rigging

WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
6.1

Installing/Removing Front Riggings

Installing
1. Turn the front rigging to the side (open footplate is perpendicular to wheelchair).
2. Install the front rigging hinge plates onto the hinge pins on the
wheelchair frame.
3. Push the front rigging toward the inside of the wheelchair until it
locks into place.
 The footplate will be on the inside of the
wheelchair when locked in place.
4. Repeat STEPS 1-3 for the opposite side of the wheelchair.
5. To release the front rigging, push the footrest release lever inward,
rotate footrest outward.
Removing
1. Push the release lever inward and rotate the front rigging outward.
2. Lift up on front rigging and remove from the wheelchair.
3. Repeat STEPS 1-2 for the opposite side of the wheelchair.
Part No. 1148116
Hinge Pins
FIGURE 1 Installing/Removing Front Riggings
29
6 FRONT RIGGING
Release Lever
Swingaway
Footrest
Hinge Plates
Footplate
Invacare® Veranda™Wheelchair