Back; Replacing Standard Back Upholstery - Invacare Veranda User Manual

8 BACK

8 Back
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
Remove the back for unoccupied transportation purposes only. Securely install the back onto the wheelchair before use.
8.1

Replacing Standard Back Upholstery

1. Remove the two mounting screws and washers that secure the existing back upholstery to the back canes.
2. Remove the hex screw and locknut that secure one back cane to the wheelchair frame.
 It is necessary to remove only one back cane to
replace the back upholstery.
3. Pull the loose back cane out of the existing back upholstery.
4. Pull the existing back upholstery up and over the mounted back
cane.
5. Install the new back upholstery over the mounted back cane.
6. Slide the loose back cane through the new back upholstery.
7. Secure the back cane to the wheelchair frame with the hex screw
and locknut.
8. Secure the new back upholstery to the back canes with the existing
mounting screws and washers.
Invacare® Veranda™Wheelchair
Mounting
Screw
Washers
Mounting Screw
FIGURE 1 Replacing Standard Back Upholstery
32
Back Upholstery
Back Cane
Part No. 1148116