Invacare Veranda User Manual page 25

❑
Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect back cane hand grips for wear/looseness/deterioration.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑
Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
❑ Ensure the casters are free of debris.
Inspect/Adjust Periodically
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect frame and crossbraces for loose or missing hardware.
❑ Inspect for bent frame or crossbraces.
❑
Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect handrims for signs of rough edges or peeling.
❑
Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear (hub and rim).
❑ Clean upholstery and armrests.
❑
Check that all labels are present and legible. Replace if necessary.
❑ Ensure the casters are free of debris.
Part No. 1148116
5 SAFETY INSPECTION/TROUBLESHOOTING
25
Invacare® Veranda™Wheelchair