Removing/Installing The Rear Wheels - Invacare Tracer SX5 User Manual

12.6 Removing/Installing the Rear Wheels

WARNING
If changing the size of the rear wheel or a change in
the Seat-to-Floor Height is desired, this procedure
MUST be performed by a qualified technician.
Ensure both rear wheels are the same size before
using.
Tracer SX5 recliner ONLY: Mount the rear
wheels in the Rear Wheel Offset Bracket ONLY.
NEVER reposition the rear wheels to the forward
position, as stability of the wheelchair will
decrease, and injury or damage may result.
Removing
1. Note mounting position of existing rear wheel.
2. Remove the axle mounting screw and locknut that secure the
existing rear wheel and spacer to the wheel offset bracket.
3. Remove the existing rear wheel from wheel offset bracket.
Installing
1. Secure the new/existing rear wheel and spacer to wheel offset
bracket with axle mounting screw and locknut. Torque locknut to
40 in-lbs.
Part No. 1110550
Rearward
Mounting
Position
Rear Wheel
Offset Bracket
Locknut
Rear Wheel
Offset Bracket
Spacer
FIGURE 6 Removing/Installing the Rear Wheels
71
12 RECLINER
Forward Mounting
Positions
(DO NOT USE)
Rear Wheel
® ®
Invacare Tracer SX5 Wheelchair
Axle
Mounting
Screw