Replacing Back Upholstery; Replacing Seat Upholstery - Invacare Tracer SX5 User Manual

Replacing Back Upholstery

1. Remove the eight mounting screws and washers that secure the
existing back upholstery to the back canes.
2. Remove existing back upholstery from the back canes.
3. Securely tighten the new back upholstery to the back canes with the
phillips screws and washers.The following chart determines the
number of mounting screws for each seat depth.

Replacing Seat Upholstery

1. Remove the eight phillips screws and washers that secure the
existing seat upholstery to the crossbraces.
2. Remove the existing seat upholstery from the crossbraces.
3. Ensure positioning of seat positioning strap (if used). Refer to
Installing the Seat Positioning Strap on page 77.
4. Install new seat upholstery by reversing STEPS 1-2.
Part No. 1110550
Washers
Mounting
Screws
FIGURE 2
Mounting
Screw
FIGURE 3
43
7 SEAT AND BACK
Back Upholstery
Washers
Replacing Back Upholstery
16-inch Seat
Depth
Upholstery
Wheelchair
Frame
Replacing Seat Upholstery
® ®
Invacare Tracer SX5 Wheelchair
Seat