Replacing The Headrest/Back Upholstery - Invacare Tracer SX5 User Manual

5. Pressing firmly, attach the fastening strips of the new/existing headrest pillow to the fastening strips on the back of the headrest upholstery.

12.3 Replacing the Headrest/Back Upholstery


For this procedure, refer to FIGURE 3 on page 68.
Headrest Upholstery
1. Remove the headrest pillow. Refer to Replacing the Headrest Pillow on page 66.
2. Remove the six mounting screws that secure the headrest upholstery to the headrest extension tubes.
3. Secure new headrest upholstery onto headrest extension tubes with the existing six mounting screws.
4. Install headrest pillow. Refer to Replacing the Headrest Pillow on page 66.
Back Upholstery
1. Disengage one side of the spreader bar. Refer to Removing/Installing the Spreader Bar on page 69.
To remove and install the bottom two mounting screws of the back upholstery the wheelchair MUST be partially folded.

Refer to Folding/Unfolding the Wheelchair on page 22.
Part No. 1110550
Fastening Strips
FIGURE 2 Replacing the Headrest Pillow
Headrest Upholstery
Strap
Strap
67
12 RECLINER
Headrest Pillow
® ®
Invacare Tracer SX5 Wheelchair