Invacare A-4 User Manual page 97
Hide thumbs
Also See for A-4:
- Owner's operator and maintenance manual (76 pages) ,
- Parts catalog (72 pages) ,
- Owner's manual (60 pages)
Table of Contents
Advertisement
Inspect the spring for damage and replace if necessary.
4.
Position spring on bottom bracket.
5.
Position new locking lever onto spring and bottom bracket.
Make sure the two extended ends of the spring are inside the notch in the locking lever.
6.
Line up the mounting holes in the new locking lever, spring and bottom bracket.
WARNING
DO NOT overtighten locknut that secures locking lever to bottom bracket. Overtightening this locknut will prevent
locking lever from operating properly, possibly causing injury.
7.
Install mounting screw and tighten securely with locknut.
8.
Install the T-arm onto the wheelchair. Refer to Installing/Removing T-arms on page 91.
Part No 1110545
97
11 ARMS
Invacare® A-4® Wheelchair
Advertisement
Table of Contents
