Invacare A-4 User Manual page 32

Hide thumbs Also See for A-4:
Table of Contents

Advertisement

5 SAFETY INSPECTION
Suggested Maintenance Procedures
1.
Before using your wheelchair, make sure all nuts and bolts are tight.
2.
Check all parts for damage or wear and replace.
3.
Check all parts for proper adjustment.
4.
Keep quick/quad-release axles free of dirt and lint to ensure positive locking and proper operation. Refer to Adjusting Quick- Release Axle on page 64
or Adjusting The Quad-release Handle on page 65.
WARNING
Do Not use WD-40
binding and/or damage to the wheelchair may occur.
5.
Clean quick-release axles and camber inserts once a week with a Teflon
WARNING
DO NOT use your wheelchair unless it has the proper tire pressure (p.s.i.).
DO NOT overinflate the tires. Failure to follow these suggestions may cause the tire to explode and cause bodily harm.
The recommended tire pressure is on the sidewall of the tire.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced if
damaged.
Invacare® A-4® Wheelchair
®
®
, 3-in-1 oil
, or other penetrating lubricants on quick-release axles or camber inserts. Otherwise,
®
lubricant.
32
Part No 1110545

Advertisement

Table of Contents
loading

Table of Contents