Invacare A-4 User Manual page 103

Hide thumbs Also See for A-4:

Table of Contents

Remove the EXISTING elastomer from the fork.

Install NEW elastomer into fork.



Make sure the elastomer sits in the two recessed areas on the fork.

Align the mounting holes in the upper and lower portion of the fork.

Reinstall threaded sleeve and mounting screw assembly. DO NOT use excessive force.

WARNING

Use Loctite 242™ when reinstalling the mounting screw into the threaded sleeve, otherwise the fork can become

disassembled. Possible injury or damage could result.

Apply Loctite 242 to the mounting screw.

Reinstall the mounting screw into the threaded sleeve and tighten securely.

Part No 1110545

Upper Portion of

Fork

Lower Portion of Fork

Mounting Screw

Threaded Sleeve

FIGURE 2 Replacing Front Elastomers

103

12 SUSPENSION

Mounting Screw (Use

Loctite 242)

Elastomer

Invacare® A-4® Wheelchair

Table of Contents