Invacare A-4 User Manual page 95

3. Slide the T-arm into the T-arm socket until the locking lever is in the slot in the T-arm socket and an audible "click" is heard.
4. Squeeze the outer T-arm bracket and the inner T-arm bracket together until the socket is flush with the T-arm.
5. While holding the outer and the inner T-arm brackets together, tighten the four socket screws and washers. Tighten securely.
6. Press in on the locking lever and lift the T-arm straight up and out of the T-arm socket.
7. Repeat STEPS 3-6, if necessary until the T-arm slides in the T-arm socket as desired.
8. If necessary, install rear wheels. Refer to Removing/Installing Rear Wheels on page 63.
Part No 1110545
T-Arm
Socket
Screws and
Washers
Locking Lever
Outer T-Arm Bracket
FIGURE 6 Adjusting T-Arm Sockets
Inner T-Arm Bracket
Socket Screws and
Washers
Slot
95
11 ARMS
Invacare® A-4® Wheelchair