Invacare A-4 User Manual page 86

9 FOOTREST
3. Remove the two footrest tubes from the wheelchair frame.
4. Loosen, but do not remove the four locknuts that secure the
footplate to the footrest tubes.
5. Remove the footrest tubes from the footrest.
6. Insert the footrest tubes into one of two depth mounting positions
appropriate for the user.
7. Adjust the angle of the footrest plate to the position noted in STEP
1.
8. Tighten the four locknuts that secure the footplate to the footrest
tubes.
9. Insert the footrest tubes into the wheelchair frame.
10. Adjust the footrest tubes to the height noted in STEP 1.
11. Tighten the two allen screws to secure the footrest tubes to the
wheelchair frame.
Invacare® A-4® Wheelchair
Footrest Tube
Depth Mounting
Positions
FIGURE 1 Replacing the Footrest/Footplate Angle
Adjustment/Footplate Depth Adjustment
86
Allen Screws
Part No 1110545
Flat Screws
Footplate
Washer
Locknut